Diameter of cylinder（mm）
Filter cake height（mm）
1. Take-off pressure of safety valve: 0.3 MPa
2. Stirring speed: 0-14r/min
3. The lifting stroke of the mixing shaft: 400mm
The nutsche filter dryer is mainly composed of transmission device, filter unit, mixing system, lifting device, slag discharge device, filter bed and other components.
Nutsche Filter Cleaner Dryer should be installed in standard workshop which can meet GMP totally.
1. should filter or separate solid liquid material under vacuum condition or pressure condition
2.The slurry is should be washed during stirring.
3.Can be flattened filter material to avoid the effects of filtration equipment, washing effect of the gap and ditch phenomenon
4.Use same or different washing liquid to clean material
5.Flatten the material to reduce moisture
6.Heat the jacket, bottom, blade by heating medium under vacuum condition to dry material.
7.Can in situ cleaning (CIP) and in situ sterilization (SIP).
8.Can achieve in situ sampling
10.Matched with one set detachable filter chassis tank components
11.Install vertical single layer two blade S shape stirrer.
12.One pcs manual discharge valve/ sampling valve.
1. Filtration stage: separation of filter cake and mother liquor.The thickness of filter cake can reach 600mm.
2. Washing stage: further purification of filter cake, cleaning of residual mother liquor and pre-dehydration. Filter cake and washing were mixed layer by layer with lifting agitator. Finally, the slurry and suspension filter cake were fully washed.
3. Drying stages: filter cake dehydration processing, filter cake in the blender scratch step by step a loose at the same time, side wall, the bottom of the filter plate, and mixing blade of filter cake is heated at the same time, the wet rapid evaporation drying effect, speed up the evaporation, by using the method of equipment in vacuum by joining the media such as nitrogen after processing take wet evaporation, to accelerate the drying of material, improve the effect of drying.
4. Unloading stage: dry materials are automatically discharged from the side outlet through the reverse drive of s-type stirring paddle.