bulk buy freeze drying machine for sale Suppliers | TOPTION

bulk buy freeze drying machine for sale Suppliers | TOPTION

The product is safe to use. During the designing stage, its safety has been strengthed to reduce potential safety danger exists in the product itself.
Products Details
  • Feedback
  • Guided by scientific and technological innovation, TOPTION always keeps outward-oriented and sticks to the positive development on the basis of technological innovation. freeze drying machine for sale TOPTION is a comprehensive manufacturer and supplier of high-quality products and one-stop service. We will, as always, actively provide prompt services such. For more details about our freeze drying machine for sale and other products, just let us know.The product features an easy operation. It has a relatively simple operating system combining a powerful processing flow and provides simple operation instruction.

    PARAMETER


    Model

    Unit

    TOPT-10

    TOPT-12

    Specification

     

    Top-press

    Ordinary

    Top-press

    Ordinary

    Freeze-drying area

    0.08

    0.12

    0.08

    0.12

    Cold trap temperature

    <-55

    Vacuum degree

    Pa

    <10

    Water-capture capability

    Kg/24h

    3~4

    3~4

    Material tray

    mm

    ¢180*3

    ¢200*4

    ¢180*3

    ¢200*4

    Power

    w

    970

    1070

    Dimension

    mm

    565*420*(360+430)

    560*460*(710+430)

    Material volume put in device(thickness 10mm)

    L

    0.8

    1.2

    0.8

    1.2

    ¢12mm penicillin bottle

    Pcs

    560

    920

    560

    920

    ¢16mm penicillin bottle

    Pcs

    285

    480

    285

    480

    ¢22mm penicillin bottle

    Pcs

    165

    260

    165

    260

    Notice: The temperature of cold trap may reach -80℃ according to your needs.

    APPLICATION AREA


    Vacuum freeze dryer is widely used in medicine, pharmacy, biology research, chemical industry and food production, etc.

    Goods are easier for long-term preservaction after freezing-drying processing, they can be restored to the original state and maintain its chemical and biological characteristics after being watered.

    APPLICATION PROCESS


    1. Pre-freezing operation

    1) Turn on the machine and start the compressor.  Let the condenser temperature drop below -40°C.

    2) Place the sample on the sample tray (liquid directly into the tray, solid samples and vials are evenly placed on the sample tray).

    3) Put the sample pan into the pre-freeze shelf, and put the temperature sensor into the sample in full contact to reduce the error between the sample temperature and the actual temperature.

    4) Put the pre-freeze shelf and sample pan into the condenser.

    5) Put on the pre-freeze lid.

    6) When the temperature of each part of the material drops below the eutectic point, the condition is still maintained for about one hour.  At this time, the pre-cooling process is over and the drying process is ready.

     

    2. Freeze-drying operation

    1) Take out the material from the cold trap and place it on the drying rack.

    2) Place the drying rack on the cold trap.

    3) Check the sealing ring and cover the plexiglass barrel.

    4) Tighten the drain valve clockwise.

    5) Turn on the vacuum pump and vacuum gauge. The pressure drops. Pressure lower than 20Pa is normal.

    6) Open the drain (inlet) valve, and then turn off the vacuum pump. Remove the plexiglass cover and collect the material.

    7) Close the drain (inlet) valve. Open the drain (outlet) valve and clean the freeze dryer.

    8) When the vacuum pump is not working, please cover the exhaust hole.

     

    Note: a. The refrigerator must not be closed during the drying process.

    b. Drying time and freezing time are different due to the nature of the material.

    FEATURES


    1. Imported compressor, high capability of water-capture, low noise.

    2. Match the green environmental protection of international standard.

    3. Big openings of cold trap, without coil pipe inside, have pre-freeze function.

    4. Liquid crystal display, English(Chinese) interface, display drying curve.

    5. Small volume, convenient operation.

    6. Transparent bell-cap drying room is safe and visual.

    7. The pre-cooling shelf can be used as draft tube, so it can accelerate the speed of drying.

    8. International standard vacuum pump interface may connect varied vacuum pump.

    9. Cold trap and operation panel are all stainless steel, corrosion-resistant and bright.

    10. Communication interface is optional.

    11. Valve with nitrogen is optional.

    12. Dual-machine cascade refrigeration is optional, technology is mature and temperature is low(apply -80℃ device).

    Basic Information
    • Year Established
      --
    • Business Type
      --
    • Country / Region
      --
    • Main Industry
      --
    • Main Products
      --
    • Enterprise Legal Person
      --
    • Total Employees
      --
    • Annual Output Value
      --
    • Export Market
      --
    • Cooperated Customers
      --
    Send your inquiry

    Send your inquiry

    Choose a different language
    English
    ภาษาไทย
    한국어
    русский
    Español
    Current language:English